liputan6
:strip_icc()/kly-media-production/medias/5407170/original/088546900_1762673095-24844.jpg)
Liputan6.com, Jakarta Do you want to know how to mount a TV on the wall? Many people today choose to hang their TVs instead of placing them on furniture. This creates more space in your room and gives your home a modern look. Wall-mounted TVs also help keep your family safe because they cannot tip over easily.
While it's actually easy to do, you still need to know how to mount a TV on the wall correctly. Make a little mistake, your TV can fall or you damage your precious wall.
In this article, we will talk about how to mount a TV on the wall correctly in 2 different ways. First, we will talk about how to do it on the wall with a stud, and then we will talk about how to do it without a stud. We gathered the information from various sources, Tuesday (9/11/2025).
Advertisement
How to Mount a TV on the Wall With a Stud
:strip_icc()/kly-media-production/medias/5407171/original/032352200_1762673096-thom-milkovic-uV1weWrJnRM-unsplash.jpg)
How to mount a TV on the wall with a stud is the most secure method for many homes. When you attach the mount to studs, the TV sits on solid wood and the risk of falling is very low. This section explains tools, preparation, and clear steps to attach a TV to a stud wall.
What You'll Need
- Stud finder (to find the center of studs)
- Tape measure and pencil
- Carpenter level
- Drill with wood bits
- Lag bolts and washers (mount kit may include these)
- Socket wrench or ratchet set
- Mounting plate that fits your TV’s VESA pattern
- Assistant to help lift and align the TV
Instructions
1. Choose the Right Height and Spot: Sit where you watch TV and mark eye level. Decide where the center of the screen will be. Avoid mounting directly above heat sources.
2. Locate the Stud Center: Use the stud finder to find one or two studs. Mark the center of each stud with a pencil. Confirm by measuring from corners if needed.
3. Measure and Mark Mounting Holes: Hold the wall plate against the wall at the chosen height. Use a level to keep it straight and mark the pilot hole positions where they line up with the stud centers.
4. Drill Pilot Holes: Use a wood bit slightly smaller than the lag bolt diameter to drill pilot holes into the stud centers. Pilot holes make driving lag bolts easier and reduce the chance of wood splitting.
5. Attach the Wall Plate: Place the wall plate over the pilot holes. Drive lag bolts through the plate and into the studs. Tighten with a socket wrench until the plate sits flush and secure, but do not over-tighten.
6. Attach Brackets to the TV: Lay the TV face down on a soft blanket. Align the TV brackets to the VESA holes and fasten with the correct screws. Keep the screws snug but avoid overtightening.
7. Hang the TV With Help: With an assistant, lift the TV and hook the brackets onto the wall plate. Confirm the TV is secure, then tighten any locking screws to prevent movement.
8. Check Level and Connections: Use the level to make small adjustments. Connect cables and test the TV. Make any final tightening after checking that ports are accessible.
9. Safety Check: Give the mount a firm but gentle pull to confirm it is secure. Check that all bolts are tight and that the TV holds steady.
Advertisement
How to Mount a TV on the Wall Without a Stud
:strip_icc()/kly-media-production/medias/5407172/original/069996700_1762673096-adam-kenton-3GQb_qH29X0-unsplash.jpg)
How to mount a TV on the wall without a stud needs special anchors made for hollow drywall. If studs are not where you want the TV, use toggle bolts or heavy-duty drywall anchors and follow careful steps to spread the weight. This method works for lighter mounts and fixed or tilting brackets.
What You'll Need
- Mounting plate rated for studless installation
- Toggle bolts or heavy-duty hollow-wall anchors (rated for TV weight)
- Drill with larger bits for anchor holes
- Measuring tape and pencil
- Bubble level or laser level
- Long screws provided for anchors
- Masking tape to keep anchors steady during insertion
- Helper to hold the mount while you secure anchors
Instructions
1. Choose the Exact Placement: Outline the TV size on the wall with painter’s tape. Ensure power and device cables reach the TV location. Decide the final height before marking holes.
2. Select Anchor Locations on the Plate: Lay the mount plate flat and pick multiple holes across the plate to balance weight. Use at least three anchors spread across the plate when studs are not available.
3. Mark and Drill Holes for Anchors: Use the plate as a template and mark each hole. Drill the required diameter holes for your toggle bolts or anchors. Clean dust from holes so anchors sit correctly.
4. Insert Toggle Bolts or Anchors: For toggle bolts, fold the wings and push them through the wall until they open behind the drywall. For hollow-wall anchors, push or tap anchors into place until they are flush.
5. Position the Plate and Tighten: Hold the plate against the wall and thread the bolts into the anchors. Tighten slowly and evenly so the plate pulls flush to the drywall. Avoid forcing one side tighter than the other.
6. Attach TV Brackets to the TV: Secure the TV-side brackets to the back using the correct size screws supplied with the mount kit. Do this on a soft surface to protect the screen.
7. Lift and Engage the TV: With an assistant, lift the TV and hook the brackets into the mounted plate. Confirm each anchor holds and that the mount does not wobble.
8. Final Checks and Cable Management: Ensure the TV is level and secure. Use cable covers or surface raceways to hide wires without cutting into walls. Test the TV and inspect anchor tightness after a short time of use.
9. When to Get a Professional: If your TV is heavy (over manufacturer anchor limits) or the wall material is unusual (plaster, concrete, brick), hire a pro. Professional installers can safely fit mounts where home anchors may fail.